This pump was probably manufactured by Even Heat Mfg. Ltd.,
Fredericksburg, Ohio, for iron models that require a separate pump.
The brass cylinder is 5 3/8" x 27/32";
This metal handled pump is in Loren Abernathy's collection.
Two pumps from the United Kingdom and their discharge tips (above).
The nickel plated brass barrel on the upper pump is 10" x 7/8".
The brass barrel of the lower pump may have been nickel plated at one time
and is 12" x 7/8".
Neil McRae has not identified these but notes that the larger tip on the lower pump
matches the big socket on the Evening Star products.
The nickel plated brass barrel on this pump is 5 3/8" x 13/16."
It is stamped Imperial Brass Mfg. Co. on the cap which can be snapped off the barrel.
The pump was probably made for the irons made by this company
and provided with a threaded union with the filler cap.
This nickel plated brass pump came with a Hummer brand camp stove
manufactured by the Kremer Metal Products Co., Chicago, Illinois.
The barrel of the pump is 6 1/8 x 3/4 inches.
The threaded tip of the pump probably connected to a short
piece of hose, now missing, to connect to the stove's air stem.
This pump and stove are in Glenn Knapke's collection.
A Nagel-Chase lantern in Herman Mulder's collection
came with this pump attached to the globe cage.
The barrel of the pump measures 9" x 7/8"
and is nickel plated brass.
The tip of the pump has a ball-shaped nipple (right);
the metal cap on the barrel is threaded.
This pump is the same as the one above except that it no longer has the nickel plating,
it lacks a clip to attach it to a lantern globe cage,
and has a hook at the tip (left) that allows it to hold onto air screws
that are about 1/2" in diameter by about 3/16" deep (Henry Plews).
The hook is stamped PATENT APL'D FOR on the outside surface.
This pump is in Deb Lyon's collection.
The barrel of this pump is the same as the pump that came with the Nagel-Chase lantern above,
but the barrel is 10" long x 1 1/8" in diameter.
The round wood handle is also different.
This pump came with an unknown model table lamp
probably made by the Pitner Gasoline Lighting Co, Chicago, Illinois.
These pumps, in Henry Plews's collection,
are similar to the pump that came with
an iron made by National Stamping & Electric Works in the 1950's,
except for the threaded rather than a ball-shaped nipple.
The barrels of the pumps measure 6 1/16" (upper) and 6 3/8" (lower) x 1 1/4" diameter.
The siphon (lower) in this image is stamped PRENTISS WABERS PRODUCTS CO.
WISCONSIN RAPIDS, WISCONSIN.
The siphon came with a hose attached on the left end;
it will pass a fluid if the right end is lower and the knurled metal stem is pulled.
The pump (upper) barrel is 6" long x ~7/8" diameter.
Fred Kuntz got these tools with a Preway stove.
This pump came with a Kerosafe brand iron
made by the Thomas Mfg. Co., Dayton, Ohio.
The barrel of this nickel plated pump is 5 3/4" x 7/8".
The threaded end of the 3 1/2" long hose
allows it to be connected to the iron.
The pump is in Jerry Engbring's collection;
photo by Neil McRae.
This is one of two identical pumps that came with a pair of Thomas lamps, Model M1001.
The pump appears elsewhere on this page so may have been made for several manufacturers.
The pump barrel is 9 7/8" x 7/8".
The pumps and lamps are in Jon Schedler's collection.
The barrel on this pump by an unknown manufacturer
is 12" x 5/8". It is all brass except for the handle stem and inner parts for the leather.
The conical tip is solid brass with a slightly larger hole at the tip than other pumps.
I am not sure if it was made for pressurizing liquid fuel appliances.
We don't know the manufacturer for this pump, in Ed Dennis's collection.
The brass barrel with nozzle is 8 1/2" long x 1 3/8" diameter.
The threaded nipple is larger than on other gas appliance pumps.
Another pump in Ed Dennis's collection by an unknown manufacturer,
this pump is unusual in having a knurled cap.
The barrel is 12" x 7/8" diameter and nickel plated brass.
This unusual pump, in Jeff Johnson's collection,
has a brass barrel that is 6" x 7/8" diameter.
It also has a knurled cap as the preceding.
The handle and barrel diameter suggest a large appliance pump
but the length is considerably shorter than on others for this purpose.
Herman Mulder purchased this pump in Europe;
the manufacturer is unknown.
Herman reports that it works well in pressurizing appliances.
The brass barrel of the pump is 8 1/2" long x 5/8" diameter.
Ed Lundberg made this tool to get dents out of brass pump barrels.
The Delrin plastic sleeve fits over the pump barrel where the dent is located.
The hardened bronze disk at the end of the tool
is rounded to work the dent out of the brass pump barrel.
The diameter of the bronze disk just fits inside the barrel of most pumps.
|Main Apr 4, '13|
|Akron Lamp Co. lanterns Aug 1, '12||Akron Lamp Co. lamps Oct 13, '11|
|American Gas Machine lanterns - early models Mar 31, '13||American Gas Machine lamps Feb 28, '12|
|AGM lanterns - models beginning with the mid-1930's Mar 26, '13||AGM, King Seeley, & Thermos stoves Apr 4, '13|
|AGM, King Seeley, & Thermos lanterns - later models Mar 26, '13||Coleman Canada lamps Aug 20, '12|
|Coleman Canada lanterns pre- 1945 Aug 8, '12||Coleman US lamps before mid-1920's Jan 26, '13|
|Coleman Canada lanterns 1946 - 1970 Aug 8, '12||Coleman US lamps after mid 1920's Mar 30, '11|
|Coleman Canada lanterns 1971 - 1993 Apr 1, '13||Coleman hollow wire lighting Oct 31, '12|
|Coleman US lanterns pre-1931 Jan 22, '13||Coleman irons Apr 2, '13|
|Coleman US lanterns 1931 - 1945 Aug 2, '12||Coleman Canada stoves Mar 31, '13|
|Coleman US lanterns 1946 - 1960 Dec 3, '12||Coleman US stoves until early-1930's Jan 8, '13|
|Coleman US lanterns 1961 - 1980 Sept 7, '12||Coleman US stoves mid-1930's - early-1950's Apr 4, '13|
|Coleman US lanterns 1981 - 2000 Mar 31, '13||Coleman US stoves mid 1950's - present Apr 4, '13|
|Coleman US lanterns 2001 - present Apr 4, '12||Custom lamps, lights, heaters, and stoves Mar 29, '12|
|Custom lanterns Aug 3, '12||Heater etc. manufacturers A - K Feb 10, '12|
|Ehrich & Graetz/AIDA & Petromax lanterns Apr 2, '13||Heater etc. manufacturers L - Z Mar 26, '13|
|Germany lantern manufacturers Mar 30, '13||Hollow wire lighting Mar 28, '13|
|International lantern manufacturers A - G Dec 15, '12||International lamp manufacturers A - D Mar 31, '11|
|International lantern manufacturers H - P Mar 29, '13||International lamp manufacturers E - O Oct 3, '12|
|International lantern manufacturers Q - S July 11, '12||International lamp manufacturers P - Z Apr 2, '13|
|International lantern manufacturers T - Z Mar 26, '13||Irons Mar 26, '13|
|Propane lantern, stove, & heater manufacturers A - B Mar 26, '13||Links Mar 26, '13|
|Propane lantern, stove, & heater manufacturers C Sept 18, '12||Stove manufacturers A - H Mar 21, '12|
|Propane lantern, stove, & heater manufacturers D - M Mar 29, '12||Stove manufacturers I - P Sept 3, '12|
|Propane lantern, stove, & heater manufacturers N - Z Apr 1, '12||Stove manufacturers Q - Z Mar 28, '13|
|Pump manufacturers A - D May 7, '12||Sweden lamp manufacturers Apr 30, '11|
|Pump manufacturers E - Z Dec 9, '12||Sweden stove manufacturers Mar 21, '12|
|Sweden lantern manufacturers Mar 26, '13||Tilley household lamps pre-1945 Aug 22, '12|
|Tilley lanterns Mar 21, '12||Tilley household lamps post-1945 Mar 26, '13|
|UK lantern manufacturers Mar 31, '13||Tilley industrial lamps & lanterns Apr 2, '13|
|US lantern manufacturers A - I Aug 1, '12||US lamp manufacturers A - F Jan 7, '13|
|US lantern manufacturers J - M Feb 14, '12||US lamp manufacturers G - L Jan 17, '13|
|US lantern manufacturers N - O Jan 8, '13||US lamp manufacturers M - O Mar 28, '13|
|US lantern manufacturers P - Z Mar 30, '13||US lamp manufacturers P - Z Aug 27, '12|
|Wrench & other lamp tool manufacturers A - F Aug 22, '12||Wrench & other lamp tool manufacturers G - Z Mar 30, '13|
The content and opinions expressed on this page belong to the author of the page and are not endorsed by North Central College. The College accepts no responsibility for the content of these pages.
© 2000-2013 Terry Marsh